Moisturising with body butter helps replenish moisture in skin which may have been lost due to environmental factors. It also creates a barrier to the skin from nasty contaminants. OOH and they smell and feel DIVINE too!
Here is how you can make your OWN.
Ingredients
Phase A
73.2g Water
Phase B
5g Glycerin
0.7g Acacia & xanthan gum
Phase C
1.5g Stearic acid
4g Cetearyl Alcohol
2g Sorbitan olivate
4g Avocado oil
4g Baobab oil
4g Blackcurrant oil
Phase D
0.8g Phenoxyethanol, Ethylhexylglycerin
0.8g Tocopherols - mixed
Method
1. Measure out phase A.
2. Combine phase B to form a slurry. Add to phase A and stir through until a homogenous gel forms.
3. Heat phase A/B to 75⁰C. Combine phase C and heat to 75⁰C. Add phase C to phase A/B under high shear stirring and mix until a smooth, glossy, homogenous emulsion forms.
4. Allow mixture to cool under low shear stirring until <40⁰C. Add phase D and stir through under low shear until homogenous.
5. Allow to cool <25⁰C. Check/adjust final pH to 5 - 5.5. Product will need overnight to thicken fully, do not evaluate it on the day you make it. Cover and give a final stir the next day before packing off.
DISCLAIMER: THIS FORMULA AND METHOD HAS BEEN DEVELOPED BASED ON THE THEORETICAL SELECTION OF LISTED INGREDIENTS; ALL COSTS ASSOCIATED WITH PRODUCING A SAMPLE OF THIS PRODUCT IS THE USER’S RESPONSIBILITY INCLUDING ANY REWORKS OR FAILS. WE RECOMMEND SMALL SAMPLES AND PILOT PRODUCTION PRIOR TO FULL SCALE PRODUCTION.
REFER TO SUPPLIER SAFETY DATA SHEETS (SDS/MSDS) TO ENSURE SAFE HANDLING OF ALL RAW MATERIALS. WE HOLD NO RESPONSIBILITY FOR INAPPROPRIATE USE OF MATERIALS SELECTED, THE FORMULATION OR METHOD, IN PART OR AS A WHOLE.
IT IS A CONDITION OF USE OF THIS FORMULA AND METHOD THAT THE USER HOLDS FULL RESPONSIBILITY FOR ENSURING SAFE AND CORRECT USE AND STORAGE OF ANY MATERIALS THEY SOURCE AND USE, AS WELL AS ENSURING COMPLIANCE WITH LOCAL REGULATIONS AND 'CLEAN PRODUCT PREPARATION' STEPS ARE FOLLOWED WHEN PRODUCING SAMPLES, ESPECIALLY FOR USE BY OTHERS. EVALUATIONS OF THE SAFETY, STABILITY AND SUITABILITY OF THIS FORMULA, METHOD AND FINISHED PRODUCT ARE THE SOLE RESPONSIBILITY OF THE USER.
THE INFORMATION PROVIDED ON THIS SITE IS OF A THEORETICAL AND GENERAL NATURE AND DOES NOT REPRESENT BRAND OR PRODUCT SPECIFIC ADVICE. WE SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES RESULTING FROM USE OF OR RELIANCE ON THIS INFORMATION.
INCI NAMES PROVIDED ON THIS SITE ARE USED AS A GUIDE TO ASSIST WITH SELECTIONS AND PRODUCT DESCRIPTIONS. USERS WILL NEED TO SOURCE AND CHECK FULL MATERIAL INFORMATION FROM THEIR SUPPLIERS AND PREPARE COMPLIANT INGREDIENT LISTS SPECIFIC TO THE MATERIALS THEY ACTUALLY USE.
